Nextiva V3320RD Operation & User’s Manual

36, Configuring the RTSP Settings Real Time Streaming Protocol (RTSP) is an application-level protocol for the transfer of real-time video data. The Nextiva V3320RD series support the RTSP protocol to stream H.264 and MJPEG video to third party media players like VLC or Apple QuickTim…

9, Summary of Changes This section lists technical updates and new material added to the Nextiva V3300 User Guide. Revision 1- January 2013 This is the first edition of the Nextiva V3300 Series User Guide. What's New Easy-to-install compact recess mini-dome IP camera Single PoE co…

39, 6. Click Save to enable the settings or click Restore to use the default settings. Configuring the Date and Time Setting the date and time ensures that the video and data recordings on the IP camera accurately reflect the date and time the video or data was taken. If you enabled the Daylight S…

42, Upgrading Firmware Firmware upgrade allows you to install new firmware files on the IP camera. A reboot is required to ensure the new firmware is applied. Note You will not have video during the time that the IP camera is updating; this is typically a process that can take several minutes. Theref…

48, Index A Accessing Home Page 23 C Configurations Exporting 44 Importing 43 Configuring Date and Time 39 Configuring Events 32 Configuring Image Settings 24, 27 Configuring Network Settings 34 Configuring Privacy Mask 30 Configuring RTSP Settings 36 Configuring User Accounts 38 D Date Configuring 3…

26, Nextiva V3320RD R, G and B Gain: Set manual gain value of R Gain, G Gain, & B Gain from level 0 to 255.The red (R) gain is used to adjust the color red in the viewing image. It allows adjusting red gain manually according to user requirement ranging from level 0 to 255. The green (G) gain is used to adju…