Messoa LPR615 Quick Start Manual

8, Messoa LPR615 6 Quick Start Guide 3. Put the Ethernet cable through the bottom of the housing and let it pass from the hole. Make connection of power by plugging the terminal block into the power socket. TipCautionWarning Note For waterproof installation, use the provided spacer and stick it right …

11, Quick Start Guide 9 English I/O Contacts Contact positions on the heater board Connect the power cable to the power port of the AC24V camera and to the A section (L+: power +/ N-: power- ) as above. And connect the outside AC24V power supply to the section B( L+: power+/ N-:…

14, 12 Quick Start Guide 3. Initial Conguration Before connecting the camera to your network infrastructure, it’s suggested that you connect the camera to a computer rst to perform initial congurations. 1. To access the camera, the PC must be on the same network segmen…

12, 10 Quick Start Guide 5. After you have nished wiring the Ethernet cable, close the side cover and use the provided screws to x the housing on the bracket with the hexagonal wrench. 6. Loosen the pan and tilt adjustment screws of the bracket to adjust the angle of the ho…