Meyra Optimus 2 Operating Manual

2, 2 Contents Introduction 6 Indications 7 Specifications 7 Acceptance 7 Use 8 Adjustment 8 Life span 9 Overview 10 Model: 2.322 10 Handling the electric wheelchair 11 Securing the electric wheelchair 11 Functional checks 11 Driving 11 Brakes 11 Service brake 11 Braking the electri…

28, 5 6 4 28 Remove the arm support Remove the arm support in an upwards di- rection [5]. – Therefore loosen the clamping screw (4) of the clamping guide. ☞ Note: The operating module must be re- moved first if the arm support on the control side is to be detached. To remove the operatin…

6, Meyra Optimus 2 6 INTRODUCTION We thank you for the confidence you have placed in our company by choosing an electric wheelchair from this series. With all equipment and their accessories the electric wheelchair offers the respective adaptation to your disability. Like any other vehicle, a…

9, 9 LIFE SPAN We expect an average lifespan of about 5 years for this product, as far as the product is applied for its designated purpose and all maintenance and service guidelines. The life span of your product depends upon the frequency of use, the application envi- ronment and…

41, 1 2 41 Fuses Replacing the fuses Before replacing fuses, park the electric wheelchair on a level surface and secure it from rolling away. ☞ For this observe chapter Securing the electric wheelchair on page 11. ! Attention: Only replace the safety fuse with a safe- ty fuse of the s…

13, 3 1 2 4 13 Drive-/push mode The Selection lever drive/push mode is lo- cated on the side opposite to the operating module. ! Attention: Only switch the electric wheelchair to push mode when it is standing still for positioning or in case of emergencies, but not on slopes…