Nissin Di700A Instruction Manual

2, Thank you for purchasing a Nissin product Before using this flash unit, please read this instruction manual and refer your camera owner’s manual carefully to get a better understanding of the proper operation to enjoy flash photography. Nissin Di700A type Canon and Nikon is designed for Can…

15, Switch Di700A on and while the ready lamp is on, rotate the dial and press Set button to select desired mode. Setting slave flash Di700A When flash is set to SD or SF mode, the of flash power level is indicated by the lighted LED’s. Rotate the dial to select different flash power levels…

22, Specifications Type Guide no. (at ISO 100 in m) Focal length coverage Power Source Battery loading system Recycling Time Number of flashes (Approx.) Flash duration Color Temperature Exposure control Wireless Mode TTL compensation on flash for Canon and Nikon Digital SLR cameras GN54 (at 200mm z…

20, Focus the subject. Pre-flash is fired to pre-set the correct light amount for the main subject. Remarks: FEL only works on P, TV, AV, M & A-Dep mode. Set the picture frame as you desire and release the shutter. (It depends on different type of camera, please check you camera …

12, You can select the power by rotating the dial, from the left to right, 1/128 – 1/64 – 1/32 – 1/16 – 1/8 – 1/4 – 1/2 – 1/1 (Full) power. Select your desired F--stop and / or shutter speed. Point the subject and press the shutter. Set the camera shooting mode to ei…

17, Nissin Di700A Fill-in flash and Light diffusing panel For short distance or portrait flash photography, if the light is not too sharp or too strong to the subject. Use fill-in reflector flash or diffuse the light. If the subject is close (within 2 meters), turn the flash head 90° upward and pull out …