MICRO-EPSILON LS Operator's Manual

32, Data Logger If you pull the Trigger no storage will be made and the unit changes to the Measurement mode. If no button is pressed, also no storage will be made and the unit switches off after approx. 30 s. If the storage mode is started the next free position will automaticall…

37, MICRO-EPSILON LS Software IR-Connect 7 Software IR-Connect 7.1 Installation and Start Main functions: • Download of logger data • Display and record of temperature trends • Setup of parameters System requirements: • Windows XP, 2000 • USB interface • Hard disc with at le…

30, Setup Menu 2 If the Tamb-function is activated, the current set Tamb-value can be easily displayed as follows: Trigger+ Λ ⇒Toggle between Emissivity and Tamb in lower display If, in addition, a thermocouple probe is connected, the lower display will toggle between Emissivi…

62, Emissivity 10.3 Characteristic Emissivities In case none of the methods mentioned above help to determine the emissivity you may use the emissivity tables (Appendix A and B). These are average values, only. The actual emissivity of a material depends on the following factors: • t…

35, Data Logger 1 2 3 4 To leave the data logger mode please press again the Trigger+ V simultaneously. If no button is pressed, the unit switches off after approx. 30 s. 35 thermoMETER LS …

5, CE-Conformity The product complies with the following standards: EMC: EN 61326-1 Safety Regulations: EN 61010-1:1993/ A2:1995 The product accomplishes the requirements of the EMC Directive 89/336/EEC. Scope of Supply Micro-Epsilon Messtechnik GmbH & Co.KG Königbacher St…