Related to JRC NSVS1150 Signal Processors:
-
Nibe
TSF 10
TSF 10 TSF 10 is connected to 230 V/AC supply voltage.Recommended cable cross section: 0.5 – 0.75 mm2.The supply can be taken from terminal block (13b) inFIGHTER 1310. All signal cables should be screened.The screen is connected to the terminal block on thecircuit bord in TSF 10 and to the chassis on the ...
TSF 10, 2
-
DOEPFER
A-109
A-109 doepferSystem A - 100VC Signal Processor A-10911. IntroductionModule A-109 is a voltage controlled audio signalprocessor containing the components VCF, VCA andPAN (see fig. 1 on page 4).The module is based on Doug Curtis' CEM3379 thatwas used in many Sequential™, Ensoniq™ andPPG™ synth ...
A-109, 10
-
Extron electronics
USP 507
USP 507 The Extron USP 507 (Universal Signal Processor) is a scaling product that allows most common signal formats to be processed and output in any desired format.This set up guide allows you to easily and quickly set up and configure your USP 507 using step by step instructions. It covers performing ba ...
USP 507, 4
