|
|
|
|
net4pro-i 1net4pro-i is a PIMA XPort® based Network Interface Card for connecting the Hunter-Pro series (832/896/8144) to CMS (Central Monitoring Station) via LAN/WAN. It carries a static IP number, which can only be programmed through PIMA’s software, Comax, and it is programmed with a dedicted cable (p/n ...
net4pro-i, 4
Quantum Ultra Series Product Category1IMPORTANT:IMPORTANT:Go to www.extron.com for the complete user guide, installation instructions, and specifications before connecting the product to the power source.Replacing the Quantum Ultra® Disk Drives and System Board Computer AssemblyThe Quantum Ultra has two solid state har ...
Quantum Ultra Series, 6
SiteSync IQ American Series Digital Clocks 1. Take the clock to the area where it will be used. 2. To activate the clock, connect to 120vac power. 3. Display will ash “U40” or 1:00 o’clock until it receives a signal. 4. Verify synchronization takes place within 2-5 minutesYour SiteSync ...
SiteSync IQ, 2