Octane Fitness xRide Assembly Instructions Manual

5, 5 3. Attach LCD-TV mounting arm a. Use a 5mm hex wrench to remove the two (2) lower hex screws securing the footrest to the mast. b. Hold the LCD-TV mounting arm (A) near the console mast and route the power cord and coax cable under the bracket and up through the channel in th…

4, 4 1. Attach screen mounting bracket to LCD-TV WARNING! Do not mount an LCD-TV weighing more than 8.5 lbs. (3.8 kg) on the LCD-TV mounting arm. a. Position the screen mounting bracket (B) on the back of the LCD-TV, aligning the screw holes on the bracket with the…

8, F U E L Y O U R L I F E ™ Octane Fitness Octane Fitness International US & Canada, Latin America, Asia & Asian Pacific Europe, Middle East, Africa 9200 Wyoming Avenue North Rivium Weestlaan 19 Suite 380 2909 LD, Capelle a/d Ijssel Brooklyn Park, MN 55445 The Netherlands …

7, 7 Note: If you have completed these instructions as part of the initial assembly of an xRide Commercial Series elliptical, return at this time to the Assembly Instructions for the xRide elliptical to complete the assembly. If you have installed the LCD-TV Mounting …

2, 2 A xRide Commercial Series LCD-TV Mounting Arm Contents The LCD-TV Mounting Arm Kit contains the following: Tools required: A) LCD-TV Mounting Arm • Phillips screwdriver B) LCD-TV Mounting Bracket • T-handle 4mm hex wrench (included) C) Console Back Cover, right …