SGM P-2 WASH LIGHT Operation & User’s Manual

38, 38 4 RED All Panels 0 255 0,0% 100,0% No RED >  Maximum RED All Panels 0 (0%) Fade 5 GREEN All Panels 0 255 0,0% 100,0% No GREEN >  Maximum GREEN All Panels 0 (0%) Fade 6 BLUE All Panels 0 255 0,0% 100,0% No BLUE >  Maximum BLUE All Panels 0 (0%) Fade Channel Name DMX …

37, 37 6 Channel Mode (raw or white calibrated) Channel Name DMX value DMX percentage Description Info Default DMX value Fader type 1Shutter 07 0,0% 2,7% Closed 10 (3,9%) Snap 815 3,1% 5,9% Open 0 (0%) Fade 16 151 6,3% 59,2% Strobe Fast > Slow 0 (0%) Fade 152 175 59,6% 68,6% Pulse - Open Slow …

25, 25 2 Dismantle the front and unscrew the highlighted front plugs with an Unbrako 6/HOP6 Allen key. 3 Take out the lens module. 4 Place the new lens on the PCB print spacers and carefully press the lens module in place. P2 Manual_170x113,3.book Page 25 Friday, June 19, 2015 10:12 AM…

22, 22 Fixture personality settings Setting the dimming curve The setting of the dimming curve will determine the fixture’s behavior, when changing the light intensity between 0% - 100%. Linear control provides uniform adjustment throughout the control action, whereas gamma corrected dimming pro…

3, SGM P-2 WASH LIGHT 3 P‐2 WASH LIGHT USER MANUAL © 2015 SGM ® . Information subject to change without notice. SGM and all  affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of,  inability t…