SGM G-PROFILE Operation & User’s Manual

28, 28 SETTINGS (continued) CALIBRATION (continued) FROST CALIBRATION → XXXXX PRISM CALIBRATION → XXXXX IRS CALIBRATION → XXXXX ZOOM CALIBRATION → XXXXX FOCUS CALIBRATION → XXXXX SERVICE PIN SERVICE MENU FIXTURE TYPE DEBUG Level 1 Level 2 Level 3 Level 4 Info Manual_G_Prof…

51, 51 46 Channel Mode (Standard) Channel Name DMX Value DMX Percentage Description Info Default DMX Value Fader Type 1 Shutter 07 0,0% 2,7% Closed 10 (3,9%) Snap 815 3,1% 5,9% Open 1  (‘Pre-heat’ enabled) See note 1 16 151 6,3% 59,2% Strobe Slow > Fast 152 175 59,6% 68,6% Pulse - O…

36, 36 How to replace a gobo in a gobo holder • Place gobo with silver side towards the light source. • Align index markers on the gobo and the gobo holder as shown be- low. • Insert the gobo holder and align it with the index marker on the gobo wheel as shown below. If necessary, con…

24, SGM G-PROFILE 24 INFO (continued) FANS LED FAN 1: LED FAN 2: HEAD: BASE: rpm rpm rpm rpm LOG FIRMWARE: BUILD: BUILD: UPTIME:    D: H: M: S: ERRORS SMPS PAN TILT GOBO ZOOM ERROR DETAILS Level 1 Level 2 Level 3 Level 4 Info Manual_G_Profile_EN_170x113,3.book Page 24 Wednesday, December 9, 2015 10:17 AM …

7, 7 Safety information The G-Profile is intended for professional use only. It is not suitable for household use. Impropre a l’usage domestique. Review the following safety precautions carefully before installing or operating the fixture. This product must be installed in accordance with t…