ACR Electronics RCL-75 Product Support Manual

3, Y1-03-0158G 2 Table of Contents SECTION 1 - HOW THE SEARCHLIGHT WORKS _________________ 3 SECTION 2 - PREPARING TO INSTALL ________________________ 3 SECTION 3 - INSTALLATION ________________________________ 6 SECTION 4 - OPERATION _________________________________ 10…

17, Y1-03-0158G 16 APPENDIX B - ACCESSORIES The following are options and replacement parts that can be ordered for your searchlight: Item Product Number (P/N) Replacement bulbs: 55W/12V lamp, halogen, 200hr operating life 9403 Base gasket 9425 2 nd station cable har…

11, ACR Electronics RCL-75 Y1-03-0158G 10 Seat the light assembly on the deck mount. Make sure the key is mated and the gasket edge is not pinched. Reinstall the four (4 ) stainless steel Allen bolts with the flat washer next to the plastic and the lock washer under the bolt head. (Allen wrench for these bolts…

16, Y1-03-0158G 15 APPENDIX A - SPECIFICATIONS NOTE: Specifications are for the RCL-75 with remote control Point Pad™ RCL-75 Specifications Power requirements 12 – 14 Volts DC Current draw 10 Amps Power wire leads 14 Gauge Wire harness 17’ minimum wi…

14, Y1-03-0158G 13 12) Install new bulb, aligning the larger hole toward the back of the tube with the G-clip hole. Do not touch bulb with bare hands (see Figure 16). 13) Re-install G-clip. 14) Install the rubber sleeve over the base of the reflector, flush to the G-clip. 15…

2, CAUTION: Before proceeding to install, test or use your new ACR Electronics’ product, please read this Product Support Manual in its entirety. If you have questions regarding the contents of the manual, please contact our Technical Service Department at ACR …