hopf 6875 Manual, Technical Description

39, DATA STRINGS GPS Satellite Controlled Clock 6875 - Ver. 04.00 Page 39 5.4 Data string SINEC H1 The control characters STX and ETX are only transmitted when the output is set "with control characters". Other wise these control characters do not apply. With th…

42, DATA STRINGS Page 42 GPS Satellite Controlled Clock 6875 - Ver. 04.00 5.6 Data string Master/Slave With master/slave data strings slave systems can be synchronized to an accuracy of ± 0,5 msec with the time data of the master system. In the data sting the time difference to UTC is …

20, SOFTWARE Page 20 GPS Satellite Controlled Clock 6875 - Ver. 04.00 4.3.9 Position This section enables the display and setting of the geographical position of the radio-controlled clock. Setting the approximate location position (if known) shortens the time required for first…

30, SOFTWARE Page 30 GPS Satellite Controlled Clock 6875 - Ver. 04.00 4.3.16 DCF77 Simulation In this section settings can be made for the DCF77 simulation and the DCF77 pulse. These are global settings and are valid for all outputs which emit a DCF77 simulation or DCF77 p…

29, hopf 6875 SOFTWARE GPS Satellite Controlled Clock 6875 - Ver. 04.00 Page 29 4.3.15 Outputs This section permits the shunting of output signals to the outputs of the radio-controlled clock. All the settings are made via selection lists. Only the output of serial data strings is possible…

46, DATA STRINGS Page 46 GPS Satellite Controlled Clock 6875 - Ver. 04.00 5.8 Data String SAT 1703 Time String The SAT 1703 Time String can be transmitted with all modes (e.g. with forerun or ETX to the second change). The SAT 1703 Time String can also be transmitted on reques…