Jolimark DP550 Operation & User’s Manual

29, DP550 User's Manual - 25 - 5. Adjust the right tractor to affirm the installation is correct. Insure the hole of the tractor paper suit extrude of the tractor as shown in Figure 3-10. Note: …

19, DP550 User's Manual - 15 - in “Newly-install printer network driver”. If the printer driver has been installed on the PC, adopt Upgrade-install way whose steps are shown in “Upgrade-install printer network driver”. 1. Newly-install printer network driver 1) Click “Start”…

58, Jolimark DP550 DP550 User's Manual - 54 - ○ Bend and crimp (cut sheet, tractor paper) • The paper can be used when the bend of the whole page less than 2 mm. • The bend starts from the bend point is within 15mm and above 2 mm, paper can not be used…

45, DP550 User's Manual - 41 - envelope 166 × 92 mm (6 number letter) Width × Length 240 × 140 mm (10 number letter) Thickness ≤ 0.8 mm Weight 45 ~ 90 g/m 2 label Width × Length Minimum 50 × 25 mm Total Thickness ≤ 0.8 mm Weight 64 g/m 2 Note: Please refe…

24, DP550 User's Manual - 20 - 9) Return to “Additional Port Information Required”, click “Next”. 10) Come out a window of “Completing the Add Standard TCP/IP Printer Port Wizard”, click “Finish”.…

26, DP550 User's Manual - 22 - Chapter 3 Loading Paper 3.1 Adjust the Position of the Gap Adjust Lever  Adjust the paper-thickness Regardless fixing cut sheet paper or tractor paper should adjust the gap adjust lever which on the left of the printer first. The gap adjust lever can h…