trackit VT10 Installation Instructions Manual

6, trackit VT10 -6- TrackIt Limited – V 7.5 April 2013 2 . For Your Safety Read these simple guidelines. Not following them may be dangerous or illegal. Proper Connection When connecting with other devices, read the manuals carefully so as to carry out correct installation. Do not connect…

4, -4- TrackIt Limited – V 7.5 April 2013 dashboard brackets etc). Located as high as possible without being obvious. Kept away from AM/FM radio antenna. To avoid interference do not run the GPS/GSM antenna wiring along or over the AM/FM radio. Do …

3, _____________________________________________________________________________________ -3- TrackIt Limited – V 7.5 April 2013 VT10 Vehicle Tracker IMPORTANT – READ FIRST: The purpose of this document is to establish the minimum standard required when installing TrackIt GPS…

9, -9- TrackIt Limited – V 7.5 April 2013 GPS LED (Blue) On One button is pressed or input is active. Flashing ( every 0.1 second) The unit is being initialized Flashing (0.1 second on and 2.9 seconds off) VT10 has a GPS fix Flashing (1 second on and 2 seconds off) …

11, -11- TrackIt Limited – V 7.5 April 2013 5 . Application Examples for Inputs 5.1 SOS Button Connection Connect the SOS button and wires as below picture shows: Input 1 White SOS Button Note: input voltage to Input must not over 45V (Note: An SOS button is already connec…

14, -14- TrackIt Limited – V 7.5 April 2013 VT10 Vehicle Tracker IMPORTANT – BEFORE THE VEHICLE LEAVES YOUR WORKSHOP: CALL the TrackIt Team (0508) TRACKIT and provide the device number/mobile or company/customer name to ensure the unit has been set up correctly for the customer. …