AG Neovo X-15 Operation & User’s Manual

10, 9 Step 3: With the monitor turned off, connect the monitor end power plug of adaptor to the power jack of the monitor. Then connect the power cord to the adapter and the power plug to the power source. (for X-19 / X-17 / X-15) Step 4: Turn on your computer or video equipment. Pr…

19, AG Neovo X-15 18 CVBS Input / S-VIDEO Input (Optional) Brightness Adjustment Contrast Adjustment Color Adjustment Hue Adjustment …

26, 25 X-17 Electrical characteristics 17.0” (43.1 cm) diagonal 1280 x 1024 vertical stripe 30kHz – 80kHz 50Hz – 75Hz 135MHz Screen size Pixel format Horizontal frequency Vertical frequency Maximum pixel clock Connections Power: 3-Pin AC Plug Power Consumption < 48W (On…

24, 23 Troubleshooting Symptom Check Items  No picture  Power LED is off.  Check that the power switch of monitor is turned on.  Check that the power adapter is properly connected to the monitor.  Check that the power cord is properly connected to the …

3, 2 Precautions Warning on installation  Do not cover or block the ventilation holes in the case.  Do not install the monitor near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.  Op…

12, 11 OSD Menus VGA-Input Brightness Adjustment Contrast Adjustment Horizontal Position Adjustment Vertical Position Adjustment …