BIXOLON SRP-270 Operation & User’s Manual

29, Ethernet V 4.00 - 29 - 6) Select Standard TCP/IP Port and click New port. 7) When standard TCP/IP printer add wizard window pops up, click Next. 8) Enter printer IP at Printer Name or IP Address and click Next. [Note] Enter same IP address as the Ethernet interface card…

23, Ethernet V 4.00 - 23 - 4) Select MAC Address in Board. [Note] - If many MAC addresses appear, refer to the MAC address on the label of the interface card. 5) Click Upload and select file to download. MAC Address …

34, Ethernet V 4.00 - 34 - [Appendix 2] Function Key set up 1. How to use (1) Turn on the printer (2) Wait 10 or more seconds until the Ethernet interface boots up (3) Push the Function key Function key SRP-770II (4) The settings will be printed only one time since …

4, Ethernet V 4.00 - 4 - 3. Specifications 3-1. Hardware version Hardware version is marked on the label on the interface card bracket. Interface Ver: V4.X.X has Function key while Ver:V3.X.X doesn’t have it. IFA-E TYPE IFC-E TYPE [Note] - The DIP switch on the interf…

5, BIXOLON SRP-270 Ethernet V 4.00 - 5 - 3-3. Virtual Driver - It converts output of Serial (COM) port into output of Ethernet (TCP/IP) port. - It is available for Windows 2000, XP and 2003 server. 3-4. Hardware version and Configuration Tool Hardware version Interface card Printer Configurati…

22, Ethernet V 4.00 - 22 - 7. Firmware update 7-1. Configuration Tool 1) Turn on the printer 2) Execute Configure Tool. [Note] - Use proper Configuration Tool dependent on hardware version 3) Click Search. …