Alcorn Mcbride V+ series Operation & User’s Manual

194, 10-4 V2+ Hardware Reference Port 2: RS-232 or MIDI Port 2 is factory configured as an RS-232C serial port, but can be reconfigured as a MIDI port. When reconfigured, MIDI Input is received by the MIDI IN port, and M…

211, IO64 Hardware Reference 12-9 IO64  Connecting an output to an inductive load 1. Using a Male Phoenix Connector, connect the appropriate Output pin (top pin 1 for Output1, top pin 2 for Output2, etc.) on the Outpu…

227, SMPTE Machine Hardware Reference 14-7 SMPTE Machine Digital Inputs The SMPTE Machine includes 3 front panel buttons and 8 Opto-isolated inputs that control the unit’s behavior. The buttons start, pause an…

142, Alcorn Mcbride V+ series 6-24 Advanced WinScript Programming 00:00.00 DMXRamp 15 50% 02.00 Do Cue 3 Stuff 00:00.00 DMXRamp 241 FF 01.15 00:00.00 DMXRamp 242 FF 01.15 00:00.00 DMXRamp 243 FF 01.…

130, 6-12 Advanced WinScript Programming that will generate a good random number because the operator could push the button any time, and will never push it twice at the same time. The following sequence will generate a random number:…

209, IO64 Hardware Reference 12-7 IO64 Resistor Pack Inputs RP8 1-8 RP6 9-16 RP12 17-24 RP10 25-32 Table 4 – Inputs that are affected by particular Resistor Pack values Voltage Level Used R…