Albany RCA L Owner's Manual

18, RCA L Version 2.0 18 5.4.2 Lifting with a fork lift WARNING: You must not ever lift using the bottom beam or the idler barrel between the forks and the header assembly, damage can occur. You can place the forks of the forklift up under the top roll (figure 9). Not the h…

24, RCA L Version 2.0 24 5.9 Adjustment of limit switches 1) Remove the cover of the electrical enclosure. 2) Manually raise the door to a nearly open position. 3) Depress the travelling cam retaining bracket and rotate the Open cam (figure 18). Note: turning the cam towards th…

15, RCA L Version 2.0 15 5 Installation 5.1 Inspection of the shipment The M&I Re-Coil-Away door is mostly pre-assembled before leaving the factory. The side frames together with the top roll are attached to a pallet at the time of leaving the factory. The door must be…

34, RCA L Version 2.0 34 6.6 Maintenance Schedule Due to the unique design features of your new "RE-COIL-AWAY", the need for continual maintenance normally associated with conventional door systems (i.e.: guide rollers, hinges, door track, etc.) is virtually eliminated. Th…

30, RCA L Version 2.0 30 6.5 Repairs & Removals 6.5.1 Removal and Re-installation of curtain in guides 1. Utilizing a 3/8” wrench, unbolt the hinged front guide plates of both the left and right guides. Swing the front guide plates open and place them to the side. 2. In the…