Moniteq CC-8946 Instruction Manual

3, 3 1. INTRODUCTION The Model CC-8946 is a magnetic door lock with an integrated display panel intended for use on doors that are monitored and controlled from a remote location. The unit includes a magnetic lock rated at 1200lbs and a display panel that is readily viewed by p…

6, 6 4. FUNCTIONS OF CONTROLS AND INDICATORS The functions of the items on the display panel are described below: Key switch - Used to release the magnetic lock by momentarily turning the key clockwise. The key cannot be removed in this released position. Red Lamp - Indicates that th…

10, 10 VIO GRY BLU GRN YEL ORG RED BRN BLK Common +24Vdc Push Bar Switch WHT Red Lamp Green Lamp Yellow Lamp Buzzer 3 kOhm Sense Lock Power In Terminal block at door (Not supplied) RED/BLK RED/YEL RED/GRN ALPHA 1181/15C cable (20 ft. supplied) Push Bar Switch (N/C) Direct to magnet N/C Common Ma…

5, 5 3. SUPPLIED EQUIPMENT The CC-8946 consists of the Magnetic Lock with Display Panel, Magnetic Armature and various accessories and mounting hardware to facilitate installation. The table below lists all of the items that comprise the Model CC-8946 along with a brief description…

8, Moniteq CC-8946 8 STEP 1 - FRAME PREPARATION Remove the housing cover prior to lock installation (see Figure 5-5 Exploded View). Prepare the frame for the electro-magnetic lock assembly by drilling for #14 sheet metal screws or drilling and tapping for 1/4-20 machine screws and external…