RCI 8371 Installation Manual

1, INSTALLATION 8371/8372 Surface MiniMag ® Electromagnetic Locks 1. Mount the electromagnetic lock to the door frame as outlined on the installation template included with the product. NOTE: During installation of the armature plate to the door it is essential that the armature plate remai…

2, 8371/ 8372 Electromagnetic Lock Installation Instructions (Continued) 2 SCS (Security Condition Sensor) with LED This feature can detect the quality of the locking bond between the surface of the magnet and the armature plate. The sensitivity of this feature is such that a foreign o…

3, RCI 8371 Power Connections SWITCH + - INCORRECT CORRECT + - SWITCH FILTERED DC SUPPLY FILTERED DC SUPPLY SWITCH + - INCORRECT CORRECT + - SWITCH FILTERED DC SUPPLY FILTERED DC SUPPLY INCORRECT CORRECT 8371/ 8372 Electromagnetic Lock Installation Instructions (Continued) 3 Fig. 1 Fig…

4, Product Accessories Guide Top Jamb bracket and angle bracket kit is required for use when mounting the lock on a door that swings inwards. Magnet mounts to the underside of an angle bracket mounted on the frame. Armature plate mounts to “Z” bracket assembly mounted to door face. …

5, 8371/ 8372 Electromagnetic Lock Installation Instructions (Continued) Troubleshooting Guide 5 Problem Solution Cannot remove the lock mounting bracket from top of magnet for installation. Remove anti-tamper screw and cavity cover screw. A second anti- tamper screw will be visible after the cavity …

6, © 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected] Wire Gauge Chart courtesy of Electronic Locking Devices by John L. Schum 8371/ 8372 Electromagnetic Lo…