ZALMAN CNPS10X Optima (2011) Operation & User’s Manual

10, 10 .COM English AMD Clip B . AMD Socket Installation ① Partially unscrew the four bolts located on the base of the CPU cooler. Then, insert the AMD Clips between the base and the heatpipe cover, with the clips bent away from the heatsink. Caution ② Install Bolts…

6, ZALMAN CNPS10X Optima (2011) 6 .COM English 1 2 ② Install the Bolts to the Backplate according to the socket type and secure them with Side Caps. ※ Backplate is not needed for LGA 2011 V3 / 2011 sockets. Socket 775 Socket 1156/1155/1151/1150 Socket 1366 Take note of the orientation of the Nuts and the Side…

4, 4 .COM English 4. Installation Requirements 1) Space Requirements 2) Air Guide Removal 3) Cooler Orientation 4) CPU and RAM interference check The cooler’s installation requires an unobstructed space of 85mm(width), 132mm(length), and 152mm(height), with the CPU as a central refe…

8, 8 .COM English Attach the Backplate assembly to the back side of the motherboard by aligning the Nuts to the motherboard mounting holes. If you were unsuccessful at rst attempt, you may continue with the installation without the Double-sided Tape as it is not a necessary component. Faste…

2, 2 .COM English 2. Specications 1. Precautions 1) This cooler must be used with a 120mm fan. 2) Avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. 3) Do not ingest the Thermal Grease, and avoid its contac…

5, 5 .COM English 5. Installation A . LGA Intel Socket Installation Lastly, fasten the four screws to secure the clips (Please go to Page 8 for further instructions) Partially unscrew the four bolts located on the base of the CPU cooler. Then, insert the Intel Clips betwe…