Barbeques Galore DISCOVERER G4DISL Instructions Manual

23, 23 Hotplate And Cooking Grill The hotplate and cooking grill have a vitreous enamel finish, so no curing is required. Wash thoroughly before use. Fill The Grease Cup Your barbeque is equipped with a two stage fat drainage system. Food residue drops onto the fat c…

25, 25 Cooking with the Hood Closed Using the roasting hood traps heat, moisture and flavor that is normally lost on an open top barbeque. With the hood closed and the barbeque pre-heated, its important to then turn some burners to Low and others to OFF in order to not over…

15, 15 STEP 11B FINISH THE SIDE BURNER (g) Push control knob onto side burner valve stem. (h) Reattach side burner to side burner shelf with the 2 previously removed screws and washers. Fit the side burner TRIVET (N). ( i ) Insert the small tip of the main burn…

17, Barbeques Galore DISCOVERER G4DISL 17 STEP 13 FIT THE FAT CHANELLING TRAY AND FAT CUP  Slide the FAT CHANELLING TRAY(U) into the bottom of the firebox from the rear. Place the GREASE CUP(W) into place as figure show.  Feed the regulator and hose through the hole in the right side panel.  When the barbeq…

13, 13 STEP 10 ATTACH THE RIGHT SHELF  Remove the trivet (N) from side burner.  Attach RIGHT FASCIA (AB) to RIGHT SHELF(O) with two M5x10 bolts and two M5 washers.  Attach the SHELF ANGLE BRACKET(Z) to right fascia and right shelf with four M4x10 bolts.  At…

14, 14 STEP 11A FIT THE SIDE BURNER AND HOSE ASSEMBLY (It’s best to do this with another person to help) (a) Unscrew and remove two front screws and washers holding side burner in place. Note: Do not loosen electrode screw. (b) Loosen side burner in side shelf.…