i3 International C-AX401D1M Operation & User’s Manual

7, NETWORKING Connecting to a camera using a network 1. Connect the camera to a PoE (Power over Ethernet) enabled switch or router using a RJ45 Cat5 or Cat6 connection cable. 1.1. Connect the users computer to the PoE switch or router. OR 1. Connect the camera to a perso…

9, i3 International C-AX401D1M SPECIFICATIONS The specifications are subjects to be change without notice Camera Synch System Internal Image Sensor 1/3" progressive transfer CCD Number of Effective Pixels Full scanning mode: 1280 (H) x 960 (V) Lens f=2.7~9mm, F1.2 Frame rate SVGA 1280x960 @ 15fps VGA 640x…

4, NOTES OF USE Network Connector Alarm In(Red:In/Orange:GND) Audio In(White) Power(White:-/Black:+) Alarm Out(Yellow:Out/Black:GND) Audio Out(Black) TV / IP Select Reboot Button Horizontal ADJ Ring Tu rn t he r ing to adjust th e horizontal angle of image. Tilt ADJ Screws Tu…

10, SPECIFICATIONS Network Image compression method MJPEG / MPEG4 Protocol TCP/IP, UDP/IP, HTTP, SMTP, DNS, DHCP, NTP, DDNS, FTP, RTP Connectors 2-pin terminal block Interface Network Port RJ45 with LEDs Audio IN & OUT Ports 3.5mm phone jack Alarm IN & OUT Ports 1x Alarm I…

3, NOTES OF USE Power Supply Ensure the supplied voltage meets the power consumption requirements of this camera before powering the camera on. Incorrect voltage may cause irreparable damage to the video camera and will effectively void the camera warranty Operating or storage …

1, C-AX401D1M Network Camera User Guide WARNING: Before attempting to connect or operate this product, read these instructions carefully. Save this manual for future use. To avoid electrical shock and to preserve the product warranty, DO NOT disassemble the camera. Refer servicing to qualifi…