Duplo DBM-120 Instruction Manual

20, 17 6. OPERATING e Turn the jog dial to select “Booklet”. NOTE : Even when you have selected “Booklet”, the paper will only be folded (not stapled) if you select “1” in step 3. If the “Through” is selected, the paper is ejected without being processed. The paper size ca…

21, Duplo DBM-120 18 6. OPERATING r Press the center of the jog dial to confirm the paper size. NOTE : In some output modes, the paper size cannot be set. In this case, as the output mode set and paper size selected do not match, select the suitable paper size. (Refer to “Paper size” in “12. SPECIFICATIO…

27, 24 7. FINE-ADJUSTING PAPER ALIGNMENT, STAPLING AND FOLDING POSITIONS 7-1. Check the Binding Condition The sheets of paper are not aligned along the length. Fine adjustment is required when the paper is not aligned, or the stapling or folding position is unsatisfactory. Is the paper aligned? If…

39, 36 9. DEALING WITH THE ERROR MESSAGE Compare the jam code (J1 to J12) and the following figures, and remove the jammed paper. 4 J9, J10 J2, J3, J12 J4, J5 J1 J2, J3, J4, J5, J6, J7 J2, J3, J7, J8, J9 When “Recover Valid Papers Remove From Stapler” is displayed in the display, pe…

31, 28 7. FINE-ADJUSTING PAPER ALIGNMENT, STAPLING AND FOLDING POSITIONS Press the button. All the side joggers and the back joggers move to a position where they align the paper. When the adjustment is completed, check that all the joggers lightly touch the paper edges. 11 When it is necessary to r…

41, 38 9. DEALING WITH THE ERROR MESSAGE 9-4. When “Malfunction” is Displayed When “Malfunction” is displayed in the first line of the display, perform the following. Remove any paper remaining in the unit. Open and close the top cover. Turn off the power and then turn it on again.…