HOKLARTHERM Riga Assembly Instruction Manual

23, 23 Assembly procedure - eaves - shown enlarged side rung (pos. 2.3) The side rung (pos. 2.3) above into the ridge prole and below into the soil prole to glazing insert it. There, the plate is threading. If neccessary, timber and plastic hammer to get help. Tip: Greasing plast…

13, 13 Assembly roof window corner with grub screw (V13) window prol (pos. 4.1) window prol (pos. 4.1) window prol (pos.4.2) (Pull in this prole no seal!) Recommendation! It is advisable to seal up around the window and the corner bracket, thus no moisture can occur. Attention: In the bot…

9, overview pos. description/ item number num- ber Riga S num- ber Riga V9 corner soil prole 4 4 V5 connecting plate Ortgangprol/Türzarge 4 4 V10 connecting plate 90 x 35 mm mounting cross bar/rear 2 2 V11 endplate ridge/gutter 2 2 V4 connecting plate for cross bar/roof window …

10, Riga S Riga 730 x 728 1048 x 728 10 ATTENTION! When using a foundation frame assemble in advance on this soil prole (see page S. 5, 6) soil prole (pos.1.1) door frame right (pos.1.7) door frame left (pos.1.6) corner soil prole (V9) step 1 glazing glazing self-tapping screw pan head 4,2 …

4, HOKLARTHERM Riga 4 The ISO-Cellular sheets, speak glazing, always install the UV coated side out. The plates have on the protective lm has a hint. The protective lm, rst loosen the edges and only after the complete assembly pull it off immediately. After several days of sunlight can burn the lm rm…