Glidecam Industries iGlide Set Up And Operation Manual

14, 14 #5 OPERATING YOUR GLIDECAM iGLIDE The Glidecam iGlide is designed to work correctly only when operated with two hands. (see photos #19, #20) One being the holding hand and the other being the guiding hand. If you try to operate the unit with just your holding hand, the camer…

12, 12 To test the balance of the vertical axis, perform what is called the SLED ARC TEST. To perform the “Sled Art Test” simply hold the iGlide by it’s handle and grab hold of the back end of the iGlide BASE PLATFORM and pull the base up and back until the iGlide CENTRAL POST i…

19, Glidecam Industries iGlide #12 WARRANTY For 1 year from the date of shipment, we will repair or replace your Glidecam iGlide, free of charge, in the event of a defect in materials or workmanship (the shipment date appears on your purchase receipt) which occurs during normal use in accordance with the Glideca…

9, 9 The best way of adjusting the horizontal balance is to move the center of gravity of the cam- era. This can be accomplished by either repositioning the camera on the HEAD PLATE, or by adjusting the position of the HEAD PLATE, either front to back or side to side with the camera…

4, 4 1 HEAD PLATE MID PLATE GIMBAL CENTRAL POST TELESCOPING POST BASE PLATFORM WEIGHT BLACK THUMB NUT TELESCOPING CLAMP HANDLE YOKE BOTTOM PLATE BLACK THUMB SCREW CAMERA MOUNTING SCREWS iGlide GLIDECAM …