Allsteel Align Keypad Digital Lock Operation & User’s Manual

6, Allsteel Align Keypad Digital Lock OPERATING INSTRUCTIONS - IN SHARED USE FUNCTIONALITY In assigned use functionality, users operate the lock with their assigned user credential. Operate with a User Code To unlock: Press [the assigned 4-7 digit user code] then turn the knob to the unlocked position. Open the d…

2, SETUP Locks are shipped with factory default settings (only operates by pressing . Each lock must be set up to operate with a Programming Key and Manager Keys. Insert the Programming Key. A two-tone beep will be heard and the LED will ash. While the LED is ashing, inser…

5, Replace an Assigned User Credential Replace an Assigned User Code with a New User Code: Press then insert a valid Manager Key. A two-tone beep will be heard and the LED will turn on. While the LED is on, press [assigned user code] . A two-tone beep will be heard. 1 2 3 Whi…

3, Add Manager Keys Manager Keys can be programmed to the locks at any time. Go to a lock requiring additional Manager Keys. Press . The LED will ash. While the LED is ashing, insert the Programming Key. A two-tone beep will be heard. While the LED is ashing, insert each add…

7, BATTERY REPLACEMENT* It is not necessary to uninstall the lock from the door. a. Remove the screws and the battery pack. b. Replace the two premium lithium CR2032 batteries. c. Re-Insert battery pack and screws. *In case of battery failure, operate with a valid Manager Key. a b c 7 …

1, Digital Lock User Guide Keypad digital locks are operated by a 4-7 digit User Code. Manager Keys provide management access and external power. Programming is accomplished via a Programming Key unique to the lock system. LED Usage Indicator Knob Alpha Numeric Keypad Key Slot C Button KEYS Op…