BARTEC BENKE HYGROPHIL H 4230-12 Ex Zone II Operating Instructions Manual

65, Programming 59 Operating Instructions HYGROPHIL® H 4230-12 BA 060207 5.2.5 Limit monitoring For measured values or arithmetic values you can define limits within the re- spective scale. If the value exceeds or falls below a defined limit, the warn- ing relay is activated and the ERROR LED …

86, Maintenance 80 Operating Instructions HYGROPHIL® H 4230-12 BA 060207 6.7.2 Cleaning the filter Depressurize the pipe before removing the condensate separator! Press the ratchet lever down and turn the condensate separator 45° to the left or to the right. Pull the conde…

78, BARTEC BENKE HYGROPHIL H 4230-12 Ex Zone II Maintenance 72 Operating Instructions HYGROPHIL® H 4230-12 BA 060207 6.3.7 Cleaning the measuring chamber Upper flange The measuring chamber’s upper flange, which has been left in the enclo- sure, can be cleaned using a lint-free cloth. Pull it to and fr…

18, System description 12 Operating Instructions HYGROPHIL® H 4230-12 BA 060207 1.3.11 Interfaces Two electrically isolated analogue current outputs are available for the pur- pose of evaluating and processing the measured values. You can allocate any humidity measurement variables or auxil…

104, PROFIBUS 98 Operating Instructions HYGROPHIL® H 4230-12 BA 060207 DaAdr $3B: Fullscale Format: Array [1...2] of Float Before you can write this variable you must first change to standby mode. Setpoint value that corresponds to 100% in the output. Default: Setpoint [x] Desig…