RadioLink T8S Instruction Manual

13, RadioLink T8S Radiolink Electronic Ltd www.radiolink.com 9 3.3.2 BASIC Menu There are six parameters to setup including ”REV”“SUB”“EPA-L”“EPA-R”“F/S”“DELAY” REV: Defines the relationship between the transmitter controls and the receiver output for channels with options of NO…

14, Radiolink Electronic Ltd www.radiolink.com 10 The F/S function is used in certain competitions to ensure safety landing of the model prior to flying away and dropping. Conversely, it can also be used make all servos neutral to maximize the flight time. DELAY: Adjusts the synchronous ratio between th…

8, Radiolink Electronic Ltd www.radiolink.com 4 Range Calibration: Toggle both sticks (Ch1-4) to the highest point/maximum and the lowest point/minimum. Then back to the central point. (Refer to image below) Central Point Calibration: When the joysticks are back to the central point, press the thr…

20, Radiolink Electronic Ltd www.radiolink.com 16  Do the TXT file of “Smart-phone APP” and “the computer parameter setting software” work for the same effect ? A: Both of the two files are the same, but the name of computer software needs to be changed as“model01.txt”, t…

7, Radiolink Electronic Ltd www.radiolink.com 3 (2) SBUS/PPM Working Mode Receiver indicator is Blue(Purple) with 8 channels output in total. Channel 1 is SBUS signal, channel 2 PPM signal and channel 3 to 8 PWM signal. 1.2.2 Binding Every transmitter owns a unique ID code. Before using, binding tr…

19, Radiolink Electronic Ltd www.radiolink.com 15 Chapter 5 FAQ  What is the connection order of APP--USB--T8S ? A: The best order is: Turn on T8S -- connect USB cable-- connect APP. When connected with success, a notice will pop out to open APP.  Why the voltage displayed always moves up or…