Westell Media Gateway WMT Operation & User’s Manual

47, Draft 1 - 07/11/06 030-300417 Rev. A 47 July 2006 Media Gateway (Model WMT) User Guide For example, the screen below displays America Online as the NAT service selected. After you have selected a service, click on enable. If you click enable, the following pop-up screen will b…

20, Draft 1 - 07/11/06 030-300417 Rev. A 20 July 2006 Media Gateway (Model WMT) User Guide 8.3 Disconnecting a PPP Session If you have finished browsing the Internet and want to disconnect from your PPP session, click on the Disconnect button in the Connection Overview screen (t…

24, Draft 1 - 07/11/06 030-300417 Rev. A 24 July 2006 Media Gateway (Model WMT) User Guide Select the Ethernet Configuration After clicking on OK in the preceding screen, the Network screen will be displayed. The Network screen shows the settings for the newly created location. From the Co…

40, Westell Media Gateway WMT Draft 1 - 07/11/06 030-300417 Rev. A 40 July 2006 Media Gateway (Model WMT) User Guide 13.2.1 Configuring UPNP on the Media Gateway Note: To use the UPNP functionality in the Media Gateway, your Windows XP operating system must also support UPNP. Please contact your computer manufacturer …

12, Draft 1 - 07/11/06 030-300417 Rev. A 12 July 2006 Media Gateway (Model WMT) User Guide 7.3.3 Ethernet and Wireless Combination Installation Media Gateway supports simultaneous use of 10/100 Base-T Ethernet and Wireless configurations. The following instructions explain how to install Medi…

21, Draft 1 - 07/11/06 030-300417 Rev. A 21 July 2006 Media Gateway (Model WMT) User Guide When you are ready to re-establish a PPP session, click on the connect button. NOTE: When you are ready to exit the Gateway’s interface, click on the X (close) in the upper-right corner of the …