Aube Technologies TH144 Installation And User Manual

1, TH144 400-144-003-C 2008-02-08 1/6 TURN OFF POWER TO THE SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRICAL SHOCK . Installation should be carried out by an electrician or a qualified technician. 1.1 Find a Location for the Thermostat �…

2, TH144 400-144-003-C 2008-02-08 2/6 1.3 Connecting the REM input (optional) To remotely activate the Unoccupied mode, the REM input allows connection to an optional CT240/CT241 telephone controller, a central timer or an alarm system. A closed contact …

3, Aube Technologies TH144 TH144 400-144-003-C 2008-02-08 3/6 I 2.1 Select the Control Mode The mode indicates which system is used for temperature control. Use the Heat / Cool button to select one of the following modes: 2.2 Predefined Setpoints Predefined setpoints re…

4, TH144 400-144-003-C 2008-02-08 4/6 3.1 Program Your Schedule The TH144 allows four setting changes for each day of the week. There are no pre-set programs. For each day, enter the time at which you wake up (P1), the time you leave for work (P2), t…

5, TH144 400-144-003-C 2008-02-08 5/6 4.1 Remote Unoccupied When the REM input is connected to a central system or a telephone controller and a signal is received through this input, the TH144 will switch to the unoccupied setpoint. • The yellow LED …

6, TH144 400-144-003-C 2008-02-08 6/6 Power supply: 24 VAC Maximum load: 1.5 A / 30 VAC per output Remote input: dry contact, 24 VAC / 10 mA Heat setting range: 5°C to 28°C (40°F to 82°F) Cool setting range: 15°C to 35°C (60°F to 95°F) Ba…