Patlite PHC-D08 Operation & User’s Manual

11, 11 2 2.3. RS-232C Port Wiring By connecting to the RS-232C (male) of this product and the RS-232C port of a PC with a D-sub 9 pin female-to- female type cable with straight wire connection, this product can be controlled via RS-232C transmission. *The RS-232C cable is not included. Pleas…

15, 15 2 2.8. Wiring Example The internal contacts are non-voltage relay contacts. Operate the Terminal Buss below a contact capacity of DC30V at 3A. In addition, since each contact is independent, different voltages can be connected to the product for each contact. The Power Sup…

10, 2 10 2.2.2. Power Supply Output Terminal Wiring The Power Supply Output Terminal can be used to control an external load when an AC Adaptor is used. When using the Power Supply Output Terminal, wire in accordance to the directions indicated below. [Wiring Method] 1. Use a minus driver…

21, Patlite PHC-D08 21 3 3.3.5. <Obtain Output Terminal Condition> When data is transmitted in the following format, the reply data will return with an 8 byte ASCII value to indicate the Output Terminal Buss status. When the reply data returns with a 0 [30H], the corresponding output terminal is in…

12, 2 12 2.4. USB Port Wiring This product can be controlled via USB transmission by connecting a USB (Type B) cable from the main unit to the USB port of a PC. Since this product can operate on USB Bus Power, it can be used without an AC Adaptor. However, this product requires ins…

28, 28 7 7. Replacement Parts The following is the replacement part list.When inquiring, please ask the store where you purchased this product. Model Name Part Name PHC-D08 Rubber Feet AC adapter …