CLASSÉ AUDIO CAP-2100 Owner's Manual

16, 16 6 Balanced (XLR) input These XLR jacks accept right-channel and left-channel balanced signals from a source component with balanced outputs. This input may be selected by touching the corresponding button on the main operational screen of the front panel touchscreen. The pin ass…

25, 25 • speed limit: establishes a maximum rotary speed, beyond which there will be no change in volume whatsoever; the knob’s input will be ignored completely until it slows down below the speed limit. • reset defaults: if after experimenting with various settings you decide …

12, CLASSÉ AUDIO CAP-2100 12 2 Menu button Pressing the front panel Menu button will call up the main menu system, replacing the normal operational menu and status display in the LCD touchscreen. 3 LCD touchscreen Much of your interaction with the CAP-2100 will be with the LCD touchscreen (and the CAP-21…

13, 13 In addition to receiving IR commands, the CAP-2100 can also transmit IR commands so they may be learned by third-party learning remote controls. The CAP-2100 includes a comprehensive list of discrete IR commands to facilitate the creation of reliable macros. Specifically, there are…

10, 10 extensive listening tests Excellent measured performance is to be expected in world-class products, and Classé products deliver that performance. However, experience has shown that technical excellence alone is insufficient to guarantee subjectively musical results. For this reaso…

33, 33 3. Only one speaker seems to be playing. • Check the main balance control setting of the CAP-2100 by pressing the Menu button, followed by the Balance button. • Does the problem occur with all inputs? If so, check the interconnect cables between the source component a…