Unitech PA962 Product Reference Manual

3, 3 Product Reference Guide Checking Main and Backup Battery Status....................................................................20 How to Save Battery Power...........................................................................................21 Warm Boot / Cold Boot.................…

8, 8 Unitech PA962 First Steps with the Unitech PA962 There are three ways to provide power to the PA962: NOTE: Data you enter may not be properly stored until the built-in backup battery has been adequately charged. Please be remided to turn on the back up battery before you charge …

10, 10 Unitech PA962 If a PCMCIA card is inserted into the PA962 without previously attaching a Pulling Tag, the card can be removed by affixing a length of adhesive tape to the surface of the card and pulling the card out by pulling outward on the piece of tape. PCMCIA Pulling Tags Pulling Tags s…

33, 33 Product Reference Guide Installing and Removing Software Changing Synchronization Options Synchronization options can be modified, including when you synchro- nize and what gets synchronized. In the Mobile Device window, click Tools, and then Sync Options. For each type of information, t…

5, 5 Product Reference Guide NOTICE This unit is equipped with a battery pack and backup battery. It is possible that the Unitech PA962 may not power-on due to battery discharge as a result of storage. In the above situation, plug the PA962 to the RS232 or USB cable which is with DC in port or put the…

40, Unitech PA962 40 Unitech PA962 How to Set SSID Lucent WaveLAN (Agere Orinoco) Tap Start, Control Panel.= Double-click the WaveLAN icon.= Under the “Basic” tab, after :WaveLAN Network Name9, enter :SSID9. Tap OK = Cisco Select SSID. Click OK= Select Aironet Client Utility.exe, Click OK. Click OK again. …