Universal Electronics Potenza ST Operation & User’s Manual

11, www.urcsupport.com 23 RE-ASSIGNING DEVICE KEYS The Potenza ST Universal Remote Control can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a set-top box, and two audio devices (for example, two audio receivers), re-as…

9, TV Power Master Power VCR For the first device you want in the power on sequence, press a device key (TV) once. Then press POWER once. For the second device in the power sequence, press its key once (VCR, DVD). Then press POWER. 4. …

5, www.urcsupport.com 12 Combo) and a separate TV code is also listed, you’ll need to program this code into the remote control to access volume control (see “Programming Device Control” starting on page 9). 5. For future reference, write down each working device code in the b…

7, Universal Electronics Potenza ST www.urcsupport.com 21 NOTE: You can program up to 15 key presses into one macro. 6. To add another macro, repeat steps 1 through 5, substituting the new key sequence to be added in step 4. NOTE: Programming more than five macros on the same macro key overwrites previous settings. Cleari…

3, www.urcsupport.com 10 NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and per- form the instructions on “Setting Up a Combo Unit” on page 11. Also refer to “Device Table” on page 8 to find out which devices can be programmed onto each device key. …