Duerkopp Adler 1281/5 Operating Instructions Manual

16, 5.2 Mouse with guide rail and return mechanism The mouse is used for clamping the trousers and skirt parts to avoid their sliding away. The guide rail 3 is flexible and adaptable to the contour of the workpiece. Caution: Risk of injury ! Do not reach into the open mouse. Inserting the workpiec…

32, Bottom feed (with cylinder) Via this parameter the differential feed is set. Parameter 07: Line 1 Number of stitches until the differential bottom feed engages Setting range: 0 - 2000 Parameter 08: Fullness line 1 ON/ OFF Setting range: 0 / 1 Parameter 09: Line 2 Number of stitches how lon…

56, 3. In stal ling the se wing unit 3.1 Trans port pro tec tions Before the installation of the sewing unit all transport protections have to be removed. – Remove the security tapes at the thread reel holder, machine table etc. – Remove the protective foils 1. – Remove the security…

19, Duerkopp Adler 1281/5 5.4 Adjusting the blowing air for the nozzles in the table top The blowing nozzles 1 in the table top support the precise stacking of the workpieces. – Set the intensity of the air blast by dial 2 at the control panel. Turn the dial to the right = increase the intensity of air blast Tu…

8, – External control panel Efka V850 with: - Menu navigation - Freely programmable parameters for “Differential bottom feed (optional)”, “Needle feed (optional)”, “Ejector roller”, “Puller”, “Machine parameters”, “Global parameters”, “Program sequences” - Input an…