Eiki LC-XS31 Owner's Manual

15, 15 Installation Cables used for connection • Video and Audio Cable (RCA x 3) • S-Video Cable • Audio Cable (Cables are not supplied with the projector. ) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.  No…

17, 17 Installation This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the ris…

70, 70 Appendix SVGA 1 Mode 1 Mode 2 - - - - Total dots Horizontal Vertical Display area H Display area V Reset Dynamic Real Blackboard (Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Normal True Digital zoom – Full 0–63 0–63 PC adjust Mode 1 M…

36, Eiki LC-XS31 36 Computer Input Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point  buttons to pan the image. The Panning function can work only when the image is large…

79, 79 Appendix COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 34 10 9 678 15 14 13 11 12 Red (R/Cr) Input/Output Ground (Horiz.sync.) Green (G/Y) Input/Output ----- Blue (B/Cb) Input/Output Ground (Red) Ground (Green) Ground (Bl…

31, 31 Computer Input PC adjust Menu Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory area…