Weider WESY8630C3 Operation & User’s Manual

32, 1/2" x 3/4" Spacer (69) 2" Square Inner Cap (56)2" Square Outer Cap (58) 1 3/4" Square Inner Cap (48) 1" Round Outer Cap (46) 1 1/2" Square Inner Cap (57) 1" Round Inner Cap (70) 1" x 7/8" Plastic Bushing (54) 1 1/8" x 2 1/2" Plast…

21, Weider WESY8630C3 55 56 57 SEAT ASSEMBLY 21 58. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in HOW TO USE THE TRAINING SYSTEM, beginning on page 22 of this manual. Before using the training system, pull each cable a few times to be sure that the cables…

29, Please Note: The assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat assembly. The hardware for each stage is packaged separately. WAIT UNTIL YOU BEGIN EACH ASSEMBLY STAGE TO OPEN THE PARTS BAG LABELED FOR THAT ASSEMBLY STAGE. This chart is provid…

24, 24 WEIGHT RESISTANCE CHART This chart shows the approximate weight resistance at each weight station. “Top” refers to the 6.5 lb. top weight. The other numbers refer to the 12.5 lb. weight plates. The butterfly arm resistance listed is the resistance for each butterfly arm. WEIGHT PRESS …

20, 51. Locate and open the parts bag labeled “SEAT ASSEMBLY.” Attach the Small Backrest (18) to the Ab Upright (1) with two 1/4” x 2 1/2” Machine Screws (64) and two 1/4” Washers (37). 52. Press a 1 1/2” Square Inner Cap (57) into the Rear Seat Frame (16). Insert a 1/4” x 2” Carriag…

34, PART LIST—Model No. WESY8630C3 R0600A Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. Key No. Qty. Description 1 1 Ab Upright 2 1 Top Frame 3 1 Butterfly Frame 4 1 Leg Press Upright 5 1 Right Fly Arm 6 1 Left Fly Arm 7 2 Press Arm…