Elmo P30S Instruction Manual

22, Elmo P30S 101 101 OUTLINE OF THIS CAMERA ENGLISH * : Factory setting OSD SD Split screen Menu When the output video is switched to the SD mode as per "Switching Video" (P.118) and the [MENU/ENTER] button is pressed, the OSD SD Split screen menu appears. * Select [ DISPLAY] and set to [3x3…

67, 146 ENGLISH ABOUT RS-232C ABOUT RS-232C When the RS-232C terminal is connected to the PC, the Camera can be controlled from the PC. To use communication control, be sure to set the Camera and the PC as follows: 1. Connect the Camera to the PC with an RS-232C cable. 2. Start the PC…

23, 102 ENGLISH OUTLINE OF THIS CAMERA * : Factory setting OSD SD Slide Show Setting Menu When the output video is switched to the SD mode as per "Switching Video" (P.118) and the [MENU/ENTER] button is pressed, the OSD SD split screen menu appears. When [ SLIDE SHOW SETTING] is selected…

34, 113 113 OPERATION OF THIS CAMERA ENGLISH The following procedures show how to operate the buttons for setting and operating the Camera from the OSD. For the details of the setting and operation, refer to OSD (On Screen Display) (P.97) . 1. Go to the icon to be operated or set by using the …

17, 96 ENGLISH OUTLINE OF THIS CAMERA Name Function Reference page PAUSE To pause the camera video. Pressing this button again will resume the camera video. － IMAGE ROTATION To rotate the camera video by 180º. P.144 FOCUS NEAR To move the focus to the near side. P.119 FAR To move the focu…

54, 133 133 OPERATION OF THIS CAMERA ENGLISH 1. When the OSD menu is in display, hide the OSD menu by operating the front operating panel or repeatedly pressing the [BACK] button on the wireless remote control. When [ HIDE MENU] is ON, cancel it. 2. Press the [ ] button on the front operati…