Elmo HV-C1000XG Instruction Manual

22, 11 21 1 2 3 4 5 6 7 8 9 10 Contrast To present the material with a little half tone such as texts. Images with sharp characters and lines contrasty with background can be obtained. When the [CONTRAST] button on the wireless remote control is pressed, the image becomes contrasty. When the [CONTRAST]…

20, 11 19 1 2 3 4 5 6 7 8 9 10 Color / B&W Selection To present the B&W (Black&White) material such as documents. Sharper image with no color blur on the monitor can be produced. If the [COLOR/B&W] button on the wireless remote control is pressed, images are switched. When P…

15, 11 14 1 2 3 4 5 6 7 8 9 10 4 INSTALLATION Setting of Auto Focus Operating Range The following settings of this product can be changed with the DIP Switches. Change the settings according to the connection environment. The factory settings are as shown in the following table: In de…

32, 31 1 2 3 4 5 6 7 8 9 10 11 Icon Name Function Reference Page Gamma adjustment To change the Gamma setting value (00(1.0) / 01(0.9) / 02(0.8) / 03(0.7) / 04(0.6) / 05(0.5) / 06(0.4) / 07(0.3)). The factory setting is “04 (0.6).” Gamma cannot be adjusted when the CONTRAS…

16, 11 15 1 2 3 4 5 6 7 8 9 10 ■ Connection to the analog RGB-out terminal Connect the Analog RGB-out Terminal [RGB OUT] to the equipment with an analog RGB-in terminal with the analog RGB cable (attached) or a connection cable available on the market. At this time, the position of th…

44, Elmo HV-C1000XG WARNING Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. Printed in Japan 6X1VHK002 ELMO CO., LTD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMPANI…