Fishman PREFIX STEREO BLENDER Quick Start Manual

1, Fishman PREFIX STEREO BLENDER Prefix Stereo Blender Acoustic Guitar System Warning! We strongly recommend that you familiarize yourself with the preamp's controls before you attempt to perform with this sys- tem. Failure to do so can produce painful acoustic feedback (see Quick Start on page 3). Please take a…

7, NOTE: The Notch control only affects the magnetic and piezo pickup sig- nals at the tip output. Phase Switch Flip the Phase switch back and forth until you find the position that sounds best and subdues mid-bass feedback. Mid-bass feedback generally occurs when you play bass notes above the four…

11, SPECIFICATIONS Nominal Input Level: -20 dBV Input Overload: (20 Hz - 20 kHz)-2 dBV Pickup Input Impedance: 20 M Ohms Output Impedance (tip): Less than 3.5 k Ohms Output Impedance (ring): Less than 6.6 k Ohms Nominal Output Level (tip): -12 dBV Output Level Range (ring): Max: -12 dBV Min: -16d…

12, The Fishman Prefix Stereo Blender is warranted to function for a period of One (1) Year from the date of purchase. If the unit fails to function properly within the warranty period, free repair and the option of replacement or refund in the event that Fishman is unable to make repair are…

6, Endpin Jack When you plug into the endpin jack, the Stereo Onboard Blender™ switches on. To conserve the battery, remove the instrument cable from the endpin jack when the system is not being used. It is a good idea to turn down your amp or mixer input before you plug into the endpi…