Flymo Sabre Trim Owner's Manual

1, IMPORTANT INFORMATION Read before use & retain for future reference For all customer enquiries or for replacement parts, contact:- ☎☎ 01325 300303 www.flymo.com [email protected] Sabre Trim …

3, General 1. Never allow children or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator. 2. Only use the product in the manner and for the functions described in these instructions. 3. Never operate the product when you are tir…

8, Maintenance X2 X1 • WARNING Cutting head continues to rotate after the trim- mer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard. Caring for your product After you have finished using your product follow the pro- cedure below: 1. Never clea…

7, Flymo Sabre Trim Cutting Head To remove spool cap 1. Press and hold in the two cap release latches. (T). 2. Pull cap away from the spoolholder. (T). When r efitting the spool cap 1. Keep all areas of the cap and spoolholder clean. Failure to do so may prevent the cap being securely located in the spo…

4, Assembly Instructions con’t Attatching the Trimmer Head to the Sabre Handle 1. Push the Trimmer Head onto the Sabre Handle until you hear a click. (E1) 2. Push the Trimmer Head further onto the Sabre Handle until it reaches the mark shown in Fig E2. 3. Turn the Trimmer Head collar until…

5, Auto Line Feed System H line cutter How the automatic line feed works (H) 1. When initially switching on the trimmer, a small length of line is fed out. 2. A ‘clattering’ noise will be heard when the nylon line hits the line cutter. DO NOT BE ALARMED this is quite normal. After approxi…