Quatech SS-BLT-100 Operation Manual

7, 6 Antenna Connector The connector for antenna is a standard Reverse SMA jack. Simply connect it to a 2.0dBi dipole antenna and it is 50 Ohms impedance and can support 2.4GHz frequency. (The Antenna is changeable for high gain Antenna) Serial I/O Port of RS-232 Connect the serial I…

13, Quatech SS-BLT-100 12 Apply “Connect” After finish the parameters configuration, click the icon of “Connect” in BT RS232 Config Tool screen and meanwhile press the SET-UP button immediately on the left side of the device. And then the next screen of parameters configuration is pop-up. T…

2, 1 Table of Contents 1. Introduction ……………………………………………………………….. 2 2. Package checklist ………………………………………………………….. 3 3. Product Specification ………………………………�…

6, 5 4 4 Product Panel Views Description Product Views DC-In Power Outlet The Bluetooth to RS232 is powered by a single 5V DC (Inner positive / outer negative) power supply and 200mA of current. A suitable power supply adapter is part of the pac…

8, 7 LED Indicators Red Color LED： Power indicator (When the power is on, the red color LED will be on all the time Green Color LED： Before connecting to synchronize between the device and the “BT RS232 Config Tool” software, the green LED will be blinking After connecting…

14, 13 Apply “Write” To click the item of “Write”, the meaning is to save all parameters after configuring into the “BT RS232 Config Tool”. Apply “Read” To click the item of “Read”, the meaning is to load all parameters as last time saving from the �…