Quatech PCD2-F Operation & User’s Manual

9, 4.1.1 USING ATA CARDS Insert the ATA card(s) into the PCD2-F. The ATA card(s) will be assigned a drive letter. Find which drive letter(s) have been assigned to the cards by going into the Cardsoft directory and typing "CARDINFO /V" and pressing <Enter>. The following or a s…

12, 3. High beep followed by a medium beep : Cardsoft is aware that a card was removed from the slot. This beep will sound whether the card was correctly configured or not. 6. USING QUATECH'S PC CARD LINE WITH THE PCD2-F Quatech manufactures a lin…

14, Quatech PCD2-F 2. During the system booting the following message appears: *** Installation Failed: Intel 82365SL PCMCIA Adapter not found. a. A hardware or software conflict may exist between the PCMCIA controller an…

10, To format, erase the card's contents first. When this is completed, select " Format a New Partition." This process will take several minutes. Once the format is completed, the Flash Card is ready for use. The Flash Card can be used in a manner similar to that of a flopp…

7, 6. Select "IBM Thinkpad 750" from the list. The IBM Thinkpad 750 uses a controller that is compatible with that of the PCD2-F. 7. Select the driver(s) for the type(s) of PC Card(s) to be used. 8. Select "OK." The CONFIG.SYS will be automatically mod…

3, 2.2 HARDWARE INSTALLATION 2.2.1 Jumper Settings Card Drive # JP3 & JP4 1st Card Drive 2-3 & 5-6 0,1 2nd Card Drive 2-3 & 4-5 2,3 3rd Card Drive 1-2 & 5-6 4,5 SLOT # 4th Card Drive 1-2 &am…