Rane MONGOOSE Installation Manual

9, MONGOOSE Installation Manual 9 Installation Requirements To include a Mongoose/RAD network in an audio system, the system must meet the following requirements: If you plan to use CobraNet to communicate between a Mongoose and other audio devices, those devices must be CobraNet-en…

30, MONGOOSE Installation Manual 30 Locating a Hardware Device If you want to doublecheck which physical hardware device you are viewing within the software, try using the Locate feature. is feature is available for both RAD and Mongoose devices. Within the Mongoose Tracker, you…

40, MONGOOSE Installation Manual 40 Displayed on the rear panel of the Mongoose are four status indicators for each connected RAD. If the Mongoose is communicating properly with a RAD, all four status indicators (Audio Rx, Audio Tx, Comm, and Power) should be on. e following table details possible …

10, MONGOOSE Installation Manual 10 Hardware Details Following are illustrations and descriptions of the Mongoose host device and a typical RAD. The Mongoose Host Device e primary purpose of the Mongoose host device is to connect up to eight RADs to a CobraNet network. It is typically hou…

2, Rane MONGOOSE MONGOOSE Installation Manual 2 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. …

36, MONGOOSE Installation Manual 36 To generate RAD labels: 1. Within the Mongoose Tracker, open the configuration file from which you want to generate labels. Alternatively, if you have loaded the configuration into a device, you can open the device itself. 2. Confirm that the R…