NordicTrack NTEVEX73612.0 Operation & User’s Manual

19, 19 HOW TO USE A WATTS WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 15. 2. Select a watts workout. To select a watts workout, first press the Watts Workouts button. Next, turn the resistanc…

9, NordicTrack NTEVEX73612.0 9 7 90 90 7. While another person holds the Console (13) near the Handlebar (5), connect the console wires to the Extension Wire (59), the Pulse Wire (61), and the Receiver Wire (94). Insert the excess wire into the Handlebar (5) or into the Console (13). Tip: Avoid pinching the …

23, 23 HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, you must first remove the right pedal, the seat post, the top shield cover, the …

6, 6 2. Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 95mm Screws (76). 2 3 76 1 1. Go to www.iconsupport.eu on your computer and register your product. Registration provides the following benefits: • activates your product manufacturer’s warranty •…

7, 7 3. Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 95mm Screws (76). 3 2 76 1 4 6 Adjustment Holes 1 27 4. Loosen the Adjustment Knob (27) in the Frame (1) a few turns. Orient the Seat Post (6) as shown. Then, pull the Adjustment Knob (27) outward and insert th…

28, Part No. 338723 R1112A Printed in China © 2012 ICON IP, Inc. This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law. Please use recycling facilities that are authorized to coll…