Paradyne 9261 Installation Instructions Manual

7, 7 Installing the T1 NAM In the 2- and 5-slot housings, the NAM is always installed in Slot 01. In the access carrier, the NAM can be installed in any slot. ! WARNING: Do NOT remove any jumpers located on the battery. To do so can cause non-volatile memory loss. Should a jumper become separated f…

9, Paradyne 9261 2–O K O K A LM TS T B K P S IG O O F A LM S IG O O F A LM 1–O K 9261 IN O U T IN O U T IN O U T IN O U T NET1 NET2 NET1 MON NET2 MON NET 1 NET 2 PORT 97-15647 Test Jacks LEDs 9 Front Panel LEDs and Test Jacks The T1 NAM has 12 LED (light-emitting diode) status indicators and four sets…

1, 1 9261 Dual T1 Network Access Module (NAM) Installation Instructions Document Number 9261-A2-GN10-30 October 2000 Product Documentation on the World Wide Web We provide complete product documentation online. This lets you search the documentation for specific topics and print only wha…

6, 6 Connecting the COM Port to a User Interface 1. Insert the 8-pin end of the cable into the COM port. 2. Insert the other end of the cable into the user interface (VT100-compatible terminal emulation) connector. 3. Press Enter on the keyboard to display the Main Menu. If you need to confi…

4, NAM Rear Panel PORT 2 DUAL T1 NAM NET 1 DBM PORT 1 COM NET 1 DBM (For Future Use) NET 2 Port 1 Port 2 COM 98-15637-01 NET 2 4 Installing the I/O Card The NAM’s I/O card provides the COM port, network, and DTE connections. The I/O card inserts directly behind the NAM that it supports.…

10, 10 Network 1 and Network 2 Interface LEDs Label Indication Color What It Means SIG Signal Green ON – A recoverable signal is present on the Network 1/Network 2 interface. OFF – The signal cannot be recovered from the Network 1/Network 2 interface. An LOS condition exists. OOF Out …