KERN VHT Service Manual

3, KERN VHT Basic Information Grundlegende Hinweise The device must be repaired only by trained specialist staff or personnel with professional formation (such as a repair-specialist accredited by law concerning verification). The service manual is obligatory for repair work. …

13, 5.5 CALIBRATE LOAD CELLS Calibration of load cells Standing on one of the two forks will load the load cells with your own weight. Register the weight and then stand on the other fork. The difference should not be more than 1 graduation (eg. 200 g). If there is a bigger difference, th…

1, KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Tel: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com Service manual Pallet truck scale KERN VHT Version 1.0 5/2009 GB VHT-SH-e-0910 …

5, 2 THE PRINCIPLE OF THE PALLET TRUCK SCALE The pallet truck scale consists of the following components: 1. Mechanics 2. Load cells 3. Indicator (module) 4. Battery 2.1 MECHANICS The mechanical part is the pallet truck chassis with a special fork construction. For t…

14, 5.6.4 If the display is unstable or does not react to weights, check whether the indicator causes the problem Disconnect the indicator from the load cells (also if the display will give an error message). Connect each load cell individually. If the indicator remains unstable …