Peco T180 Owner's Manual

21, Peco T180 hold; “HRS” allows you to specify 0-24 hours hold. To select your preference, press PROGRAM once. 4. Press ▲or ▼to scroll to the desired length of time. To select, press PROGRAM once. The thermostat is now on hold for the time period you selected, unless you decide to turn it off …

4, GENERAL The T180 Thermostat is a wall-mounted digital control for 2 or 4 pipe fan coil applications. The thermostat can be set for 7-day, 5/2-day, 5/1/1-day, or 1-day programmable operation. Different heating and cooling setpoints and times are programmable for 4 time periods p…

7, System Mode Display HEAT – indicates the system is in heating mode. COOL – indicates the system is in cooling mode. AUTO – indicates the system will automatically changeover between heating and cooling modes as the room temperature varies. OFF – turns off the entire system. SETBACK �…

14, PROGRAM BUTTON OPERATION Function Overview Pressing PROGRAM lights up ve program mode options, described below. Press ▲or ▼buttons to scroll through the options. As you scroll, the current option will be blinking. To select the blinking option, press PROGRAM again and you…

9, Program Override Commands HOLD – indicates thermostat is in manual operation. (Programmed settings are off, but not lost.) HOLD HRS – during programming, lights up in conjunction with clock digits; allows program to be put on hold for up to 24 hours. HOLD DAYS – during progr…

11, ▲AND ▼BUTTON OPERATION The ▲and ▼buttons function in two ways: • When you are in the default display, you can press ▲to increase, or ▼to decrease, the current temperature setpoint. This will override programmed temperature settings until the next program…