Spectra Logic Spectra 10000 Install Manual

10, Spectra 4000-10000™ Library Power Supply Replacement Guide 10 14. Tilt the power supply toward the drives and remove the two screws on the back of the power supply that hold the cage in place (Figure 13). 15. Turn the power supply upside down and remove the two screws on the bot…

14, Spectra 4000-10000™ Library Power Supply Replacement Guide 14 Caution: When reinstalling the power supply, ensure that there are no pinched cables or wires prior to tightening the captive screws. 10. Attach the AC power switch cable at the connector located by the rotary motor (Figu…

9, Spectra 4000-10000™ Library Power Supply Replacement Guide 9 12. Disconnect the AC power switch cable at the connector located next to the rotary motor (Figure 11). Note: Check to see if the 13-pin power supply DC cable connection (red, black and yellow wires) is located outside of…

13, Spectra Logic Spectra 10000 Spectra 4000-10000™ Library Power Supply Replacement Guide 13 5. Plug in the 13-pin power supply DC cable with red, black and yellow wires (Figure 21). 6. Replace the four screws that hold the power supply cage in place. Go to Step 8 once you have replaced the screws. 7. Plug in the…

3, Spectra 4000-10000™ Library Power Supply Replacement Guide 3 Contents Introduction................................................................................................4 Prepare the Library.....................................................................................5 Remove …

18, Spectra 4000-10000™ Library Power Supply Replacement Guide 18 Warning: The library is heavy, about 56 pounds. Get help moving the library. Caution: If the host computer or other equipment was restarted while the library was disconnected, you must exit all programs and shut down all equipmen…